F065
Daşky turbanyň nominal diametri:
- HL kriogen enjamlarynyň kärhana standarty tarapyndan maslahat berilýär. Şeýle hem, müşderiniň talabyna laýyklykda öndürilip bilner.
- Dizayn basyşy:
- Maslahat berilýär ≤ 16 bar. Ýa-da Kebşirlenen Birikdiriş Görnüşini (≤40 bar) saýlaň.
- Daşky turbanyň materialy
Ýörite talap bolmazdan, içki we daşarky turbalaryň materialy birmeňzeş saýlanar.
3.1.3 Keşlenen birikdiriş görnüşi
model
Baglanyşyk
Görnüş
Içki turbanyň nominal diametri
Dizayn basyşy
Material
Içki turbanyň
Standart
Bellik
W010
00X
Statik wakuum izolýasiýaly çeýe şlang üçin kebşirlenen birikme görnüşi
DN10, 3/8"
8~40 bar
300 seriýaly polat
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Daşky turbanyň nominal diametri: | |
| Dizayn basyşy | Içki turbanyň materialy. | A 304-dir, | DN40, 1-1/2" | C 316-dyr, |
| D 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Dizayn basyşy |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Maslahat berilýär ≤ DN25 ýa-da 1". Ýa-da flanşlar we boltlar bilen wakuum ştanga birikme görnüşini (DN10, 3/8"-den DN80-e, 3"), kebşirlenen birikme görnüşini (DN10, 3/8"-den DN150-e, 6") saýlaýar. | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Standart | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Daşky turbanyň nominal diametri: |
| HL kriogen enjamlarynyň kärhana standarty tarapyndan maslahat berilýär. Şeýle hem, müşderiniň talabyna laýyklykda öndürilip bilner. | Daşky turbanyň materialy | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Görnüş | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Standart | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Dizayn basyşy. | / | DN25, 1" | DN25, 1" | / | |
| Içki turbanyň materialy. | / | DN25, 1" | DN25, 1" | / | |
| C 316-dyr, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Içki turbanyň nominal diametri:
| Maslahat berilýär ≤ DN25 ýa-da 1". Ýa-da flanşlar we boltlar bilen wakuum ştanga birikme görnüşini (DN10, 3/8"-den DN80-e, 3"), kebşirlenen birikme görnüşini (DN10, 3/8"-den DN150-e, 6") saýlaýar. | Daşky turbanyň nominal diametri: |
| HL kriogen enjamlarynyň kärhana standarty tarapyndan maslahat berilýär. Şeýle hem, müşderiniň talabyna laýyklykda öndürilip bilner. | Dizayn basyşy: |
| Maslahat berilýär ≤ 16 bar. Ýa-da Kebşirlenen Birikdiriş Görnüşini (≤40 bar) saýlaýar | Daşky turbanyň materialyÝörite talap bolmazdan, içki we daşarky turbalaryň materialy birmeňzeş saýlanar.3.2 Dinamik Wakuum Izolýasiýaly Turba Ulgamy3/S |
| 3.2.1 Sowuk ştangasynyň gysgyçly birikdiriş görnüşi | model |
| Baglanyşyk | Görnüş |
| Içki turbanyň nominal diametri | Dizayn basyşy |
| Material | Içki turbanyň |
| Standart | Bellik |
HDB01008
Dinamik wakuum izolýasiýaly çeýe şlang üçin gysgyçly wakuum ştangasynyň birikdiriş görnüşi
lDN10, 3/8"
l8 bar
| 300 seriýaly polat C 316-dyr, | Içki turbanyň materialy. | |
| A 304-dir, | B 304L,C 316-dyr,D 316L, | |
| E başga. | HLH | DB01508 |
| DN15, 1/2" | Dizayn basyşy: | Dizayn basyşy: |
| DN20, 3/4" | Dizayn basyşy: | Dizayn basyşy: |
| DN25, 1" | Dizayn basyşy: | Dizayn basyşy: |
| Daşky turbanyň nominal diametri: | Dizayn basyşy: | Dizayn basyşy: |
Maslahat berilýär ≤ 8 bar. Ýa-da Flanşlar we Boltlar bilen Wakuum Bayonet Birikdiriş Görnüşini (≤16 bar), Kebşirlenen Birikdiriş Görnüşini (≤40 bar) saýlaň.Daşky turbanyň materialyÝörite talap bolmazdan, içki we daşarky turbalaryň materialy birmeňzeş saýlanar.
Güýç ýagdaýy:
HL-HX-X-Bu ýer wakuum nasoslaryna elektrik energiýasyny bermeli we HL Cryogenic Equipment kompaniýasyna ýerli elektrik energiýasy baradaky maglumatlary (wolt we Gers) habar bermeli.-00-X
3.2.2 Flanşlar we boltlar bilen wakuum ştangasynyň birikdiriş görnüşi
model
Baglanyşyk
Görnüş
Içki turbanyň nominal diametri
Dizayn basyşy
Material
Içki turbanyň
Standart
Bellik
Nominal Diameter of Inner Pipe
00X
8~16 bar
DN10, 3/8"
8~16 bar
300 seriýaly polat
Design Pressure
Dizayn basyşy.
08 8bar,
16 16bar-dyr.
Içki turbanyň materialy.
A 304-dir,
B 304L,
C 316-dyr,
D 316L,
E başga.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Wakuum izolýasiýaly faza bölüji seriýasy | DN10, 3/8" | Ermeni
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| Fransuz diliDaşky turbanyň nominal diametri:X | DN15, 1/2" | |||||
| Fransuz diliMaslahat berilýär ≤ 16 bar. Ýa-da Kebşirlenen Birikdiriş Görnüşini (≤40 bar) saýlaň.X | DN20, 3/4" | |||||
| Fransuz diliGüýç ýagdaýy:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandiýaly
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Fransuz dili08 8bar,00X | we 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| Fransuz diliSamoa00X | DN15, 1/2" | |||||
| Fransuz diliSindhi00X | DN20, 3/4" | |||||
| Fransuz diliTäjik00X | DN25, 1" | |||||
| Fransuz diliTaý00X | DN32, 1-1/4" | |||||
| Fransuz diliÖzbek00X | DN40, 1-1/2" | |||||
| Fransuz diliXosa00X | DN50, 2" | |||||
| Fransuz diliZulu00X | DN65, 2-1/2" | |||||
| Fransuz diliOriýýa00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Güýç ýagdaýy:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | 300 seriýaly polat | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| Fransuz diliDN15, 1/2"00X | DN15, 1/2" | |||||
| Fransuz diliDN20, 3/4"00X | DN20, 3/4" | |||||
| Fransuz diliDN25, 1"00X | DN25, 1" | |||||
| Fransuz diliW03200X | DN32, 1-1/4" | |||||
| Fransuz diliW04000X | DN40, 1-1/2" | |||||
| Fransuz diliW05000X | DN50, 2" | |||||
| Fransuz diliW06500X | DN65, 2-1/2" | |||||
| Fransuz diliW08000X | DN80, 3" | |||||
| HWakuum kurtka şlangy00X | DN100, 4" | |||||
| HHytaýyň suwuk kislorod akymyny düzgünleşdirýän klapan00X | DN125, 5" | |||||
| HTopdan satylýan Hytaý Hytaý ISO standart tanky 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSDinamik Wakuum Nasos Ulgamy00X | Wakuum izolýasiýaly faza bölüji seriýasy | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| Fransuz diliWhatsapp00X | DN15, 1/2" | |||||
| Fransuz diliWeChat00X | DN20, 3/4" | |||||
| Fransuz diliNemes00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Grekçe
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Daniýaça
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaosX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Ermeni
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstonX | DN15, 1/2" | |||||
| HLHFriz diliX | DN20, 3/4" | |||||
| HLHGujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandiýaly
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoa00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDTäjik00X | DN25, 1" | |||||
| HLHDTaý00X | DN32, 1-1/4" | |||||
| HLHDÖzbek00X | DN40, 1-1/2" | |||||
| HLHDXosa00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOriýýa00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
